Adhesives, Sealants & Cleaners
Alpha’s complete line of technologically advanced adhesives and sealants that stand up to weather extremes, ozone, UV rays and vibration are:
- All Weather Sealants
- Solvent Based Adhesives
- Hot Melt Adhesives
- Water Based Adhesives
Browse, shop and purchase Alpha’s full line of adhesives, sealants and cleaners at the Lippert Components website.
Exclusively distributed by Lippert Components®, Alpha Systems’ self-leveling sealants are great for flat, horizontal surfaces like RV rooftops.
Formulated to withstand harsh weather environments along with the flexibility to absorb shock, vibration and stress from RV flex on harsh roadways, Alpha’s products help RV owners. To keep an RV looking good and lasting longer, you’ll find a full selection of premium sealants, tapes, roofing kits and much more.
Whether you need to seal around a window or railing, or simply patch up spots on your roof, these premium products will help you or your RV dealer get the job done right. Enjoy the road ahead without the worry!
- Patrick Pro Grip – This is a professionally designed formula for interior and exterior subfloor installations. It provides a super strong bond in all weather conditions. Its advanced formula has been tested and is suitable for use with most building materials.
RV Roof Sealant Colors
Available in Black, White, Beige, Almond, and Gray, Alpha Systems’ high-strength sealant can withstand the wear and tear of outdoor elements, plus, the vibration and shock of RV travel. Delivering on excellent adhesion to wood, metal, glass, and most other common construction materials—the Alpha Systems Self-Leveling Sealants are the preferred choice of RV manufacturers and other OEMs throughout the USA and Canada.
Apply 3011 using a 9” paint roller. This is a water base material that can be used on “foam” backed “rolled goods” materials; like soft ceilings in motorhomes. When applying, bed sheet the material applying half of the adhesive to one side and then quickly press the rolled goods material into the adhesive. Then repeat the process on to the other half.
The 3015 is called anti-wicking. It is used to waterproof fiberglass laminated panel edges and routed openings. Apply 3015 with a small 3” paint roller or brush. Colors available are black and white and turn clear after curing.
A bead size of ¼” diameter is required for the water based, non-sag “back panel” adhesive.
Two 1/16” diameter beads are required. These two beads will yield 3,000 linear feet per gallon.
The 5100 can begin to “rip” plywood in 4-6 hours depending on temperature and humidity.
Apply 5100 with pump and flow equipment, gun, wand and applicator.
3100 is designed for use on wood and other fibrous substrates.
A minimum temperature of 40 degrees is required.
It only takes 2 minutes for the product to cure.
The temperature should be 115 degrees F +/- 5 degrees
The substrates should be between 40 and 100 degrees F.
The temperature should be set between 100-110 degrees F.
Only 5 minutes is needed.
5101 is best used in a typical back panel application. It is a non-sag for vertical applications.
1010 is best used for applications where a self-leveling material would be too runny. It is ideal for roof edge molding rails.
8100 should only be used with felt-backed materials. Do NOT use on SuperFlex or EPDM
For Lauan and smooth side OSB the recommended thickness is 10 mils. For rough side OSB it is 15 mils.
For Lauan and smooth side OSB the recommended thickness is 10 mils. For rough side OSB it is 15 mils.
For Lauan and smooth side OSB the recommended thickness is 10 mils. For rough side OSB it is 15 mils.